Batch Foam Machine (Model BFM B)

BATCH foam machines are used to produce flexible PU foam blocks with one block at a time process. These are low priced machines meant for relatively low production. Capacity upto 30 to 40 blocks per 8 hour Density 10 to 32

GENERAL SPECIFICATION:

GENERAL SPECIFICATION MODEL BFM B
MIXER MOTOR 10 H.P. with AC drive for speed control.
MIXING TANK 210 Liters
MIXING CAPACITY 125 KG
MATERIAL DISCHARGE From bottom by manually operated lifting mechanism.
CONTROL PANEL One mould of 6ft. x 6ft. having aluminium sheets on sides & wooden board on the base.
SPACE REQUIRED 4m x 8m
POWER REQUIRED 10 HP
POWER SUPPLY 415V AC 50Hz

PROCESS


First, all chemicals are weighed & kept ready for the process. Polyol and catalysts are poured into the mixing vessel and first mixing is started by pressing the speed 1 push button. Now TDI & Water are poured in quick succession & Speed 2 is switched ON. The machine mixes the chemicals & releases them into the mold. The open door in the mold is closed manually. The block may be demolded after 5 to 10 minutes.

Testimonials

View All

It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.

R.P. Foam Home Pvt. Ltd. (Director) -------
2007-13, A.S. Enterprises. All Rights Reserved.